Home / Auto & Tires>Auto Electronics / Rockville ATOM P60 4800 Watt Peak/1200w RMS 2 Channel Car/ATV Amplifier w Meter
  • Rockville ATOM P60 4800 Watt Peak/1200w RMS 2 Channel Car/ATV Amplifier w Meter
  • Rockville ATOM P60 4800 Watt Peak/1200w RMS 2 Channel Car/ATV Amplifier w Meter
  • Rockville ATOM P60 4800 Watt Peak/1200w RMS 2 Channel Car/ATV Amplifier w Meter
  • Rockville ATOM P60 4800 Watt Peak/1200w RMS 2 Channel Car/ATV Amplifier w Meter
  • Rockville ATOM P60 4800 Watt Peak/1200w RMS 2 Channel Car/ATV Amplifier w Meter
  • Rockville ATOM P60 4800 Watt Peak/1200w RMS 2 Channel Car/ATV Amplifier w Meter
  • Rockville ATOM P60 4800 Watt Peak/1200w RMS 2 Channel Car/ATV Amplifier w Meter
  • Rockville ATOM P60 4800 Watt Peak/1200w RMS 2 Channel Car/ATV Amplifier w Meter

Rockville ATOM P60 4800 Watt Peak/1200w RMS 2 Channel Car/ATV Amplifier w Meter

Quantity
ADD TO CART
BUY IT NOW
  • Detail
    What's in the Box: Amplifier. Birth sheet with Dyno-tested power. Mounting Screw Kit. Owners manual. Warranty Features: Rockville ATOM P60 4,800 Watt Peak and 1200 Watt RMS Class D 2 Ohm Car Stereo Amplifier Dyno certified RMS Power (less than 1 % distortion) (Use these ratings when comparing with other premium brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 600 Watts x 2 Channel <1% THD+N @ 14.4 Volts. 4 Ohm: 360 Watts x 2 Channel <1% THD+N @ 14.4 Volts. 4 Ohm Bridged: 1200 Watts x 1 Channel <1% THD+N @ 14.4 Volts. Peak Power: (Use these ratings when comparing with great budget brands such as Boss, Power Acoustik, Crunch, etc). 2 Ohm: 2400 Watts x 2 Channel. 4 Ohm: 1440 Watts x 2 Channel. 4 Ohm Bridged: 4800 Watts x 1 Channel. Digital Voltage Display on Amp. Adjustable Low Pass Filter: 50Hz 250Hz. Adjustable High Pass Filter: 50Hz 250Hz. Painted Conformal Coating PCB Board (Uses 2577 Waterproof Glue). Rustproof Aluminum heat sink with black hairline finish. Stainless steel end panels are rustproof. All screws and mounting hardware are stainless steel and rustproof. Bottom panel is aluminum and rustproof. 4 Gauge power and ground terminals. 10 Guage speaker wire temrinals. All channels on the amp have crossovers so they can each be used for subs or full range speakers or tweeters or midrange speakers. All channels on the amplifier are bridgeable. High-Speed MOSFET Power Supply. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Tertiary Supplies Circuitry. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Full IC-Controlled Protection Circuitry. Fully Adjustable 12dB Bass Equalizer. Adjustable Input Level Control. Mute and Delay Soft Start System. 8 Volt Preamp Circuitry. Status Mode LED Indicator.
  • Customer Reviews
    No comments