ezcoo HDMI Splitter 1x2 4K 60Hz D-olby Vision Atmos, 4K HDMI Down-Scaler, EDID Switch TV Game PS5

Audio Video HDMI 2.0 4K 60Hz 4:4:4 8bit 18Gbps HDCP2.2, HDR D-olby Version, 1080p 120Hz/60Hz 3D, 3840x2160 60Hz, 1440p 60Hz; D-olby Atmos Digital 7.1 /5.1/ 2.1 CH, DTS:X HDMI 4K Down-scale to 1080P only. Does not down-scale 4K D-olby Version 4:2:2 and frequency. KEY USAGE Please use good HDMI2.0 AWG26 c-able less than 3 meter IF 4K & 1080p TV work in sync, please set EDID COPY mode, connect 4K TV to Splitter OUT 1, 1080P TV to OUT 2, set SCALER 2 ON. EDID copy OUT 1 prior IF 4K HDR TV & D-olby Atmos soundbar work in sync, please set splitter EDID to 4K 7.1 mode, set HDMI source Video 4K HDR/HDR10/D-olby Vision, Audio Bitstream out D-olby Atmos; Connect 4K TV to splitter OUT 1, Soundbar to OUT 2. IF 4K TV & 5.1CH soundbar work in sync, please set EDID 4K 5.1CH mode. Set EDID COPY for two 1080p TVs Compacted design, mini size for portable, flexible, easy installation. Package 1x HDMI Splitter 1x Micro-USB c-a-b-le 1x User Manual Warm Notice: NOT support EXTEND, MIRROR ONLY. Splitter EDID just pass through signal, not create. Hdmi splitter NOT support ARC , eARC, CEC, VRR, upscaler ; NOT convert HDR to SDR. It is not audio down mixer. NOT support 4K60hz & 1080p120hz work in sync. Trouble-shooting Please use new HDMI 2.0 c-able less than 3 meter prevent signal issue. To get both of D-o-lby Atmos and D-olby Vision in sync, please ensure TV and Receiver support in advance. Please TURN OFF Scaler if play HDR D-o-l-b-y Vision. To game user, Please set graphics card or monitor refresh frequency same as HDMI source refresh frequency, such as HDMI source 4K 60Hz, monitor be 1080P 60Hz. Sometime, just change HDMI source Video/Audio setting or RESET to solve issue. For Fiber HDMI c-a-b-le, please pay attention at HDMI SOURCE/ DISPLAY port description,plug correct port to correct HDMI source, display device. To solve 4K issue, please use qualified less than 3m HDMI2.0 c-a-b-le; Check if TV HDMI input port is consistent with TV output channel. For power up issue, please change power adapter or power device. Press UPDATE for 3 secs to solve HDCP issue, or solve picture flash.